Discharging Tailings Recovery Machine

ZGT series disk vacuum filter for metal ore fully draws on the advantages of similar products, aiming at the characteristics of high density of metal minerals, fast settlement, and strong impact force of solid particles on the filtrate pipe, the overall performance and reliability of each component are optimized to ensure the excellent dehydration index obtained in the solid-liquid separation of metal minerals. Through the successful practical application of users, the main technical indicators and performance have reached the level of advanced products. 

Main features: 

1, the fan filter plate dewatering hole distribution is uniform, the porosity is reasonable, the bar size is large, made of high strength engineering plastic, the service life is increased by 1-1.5 times.

  2, the filtrate pipe filter area is large, the distribution head abdominal cavity area is large, improve the pumping rate and filtrate discharge effect. 

3, wear-resistant nylon monofilament or double double filament filter cloth to improve the dehydration rate and not easy to block, extend the service life. 

4, multi-point dry pump centralized automatic lubrication. 

5, filter cloth automatic cleaning device, to maintain its good dehydration effect. 

6, horizontal forced variable speed mixing, shaft end using rubber and graphite packing and water pressure difference triple seal to ensure no leakage. 

7, the main transmission stepless speed change, according to the concentration and flow of the material adjustment (AC speed regulation motor or inverter), in order to achieve the ideal working effect.

  8. Each plate is composed of 20 filter plates, which strengthens the control of the filtration process and makes the cake evenly thick. 

9, friction plate adopts special wear-resistant material boron cast iron, rigid and soft, good sealing effect, long service life. 

10, the filtrate pipe for high strength wear-resistant ceramic composite steel pipe, increase the life of more than 10 times.

  11, the filtrate pipe and filter fan interface to remove the upper and lower flanges, the use of mold positioning direct welding, reducing 90% of possible air leakage points

 Founded: 2011

• Facility Area: 10,000 m²

• Annual Output Value: Over 20 million RMB

• Team Size: 45 employees

• Senior Engineers: 4

• Professional Engineers: 15

• Product Portfolio: 30+ series, 200+ models

• Certifications & Compliance

• ISO 9000 Quality Management System Certified

• 

• 
  

• Service & Support

• Pre-sales: Free material testing, engineering calculations, and site assessment

• Installation & Commissioning: On-site technical guidance until stable operation is achieved

• Training: Comprehensive operator and maintenance training

• Warranty: 12 months standard (extended options available)

• Spare Parts: Common wear parts in stock, emergency dispatch within 24 hours

• Remote Service: Optional GPRS module for remote diagnostics, tuning, and firmware updates

• Response Time: 2-hour response, 48-hour on-site arrival (major domestic regions)

After-Sales Service & Warranty

Delivery & Logistics:

FAQ – Quick Answers to Common Questions

Q1: Can it handle high-temperature materials?
A: Standard model up to 80°C. 

Q2: What if my material is slightly sticky or moist?
A: Our variable-pitch airlock handles up to 20% moisture for most powders. For sticky materials, we recommend an optional internal coating or polishing treatment.

Q3: How is calibration performed on-site?
A: You can perform online material calibration (preferred), or use span check with a known weight. Remote calibration is also supported  without an on-site visit.

Q4: Do you provide installation and commissioning?
A: Yes. We offer supervision service — our engineer will guide your team through installation, startup, and performance testing .

Q5: What if I need a custom capacity or flange size?
A: We provide custom engineering for rotor diameter, inlet/outlet connections, and motor options — just specify your requirements in the inquiry.